🔧 1CR Remote Start — Full Coding Guide

For the 2 files from the bot: 017C (DME1) + 0180 (DME2). 188 bytes each.

Step 1 — Import the FSC files

Unzip FSC_VIN_1CR.zip → open E-Sys → import both .fsc files to address 0x12 first. Then code below.

Step 2 — Add 1CR to the FA (vehicle order)

E-Sys → Expert Mode → Coding → Read FA → Save. Edit FA → SALAPA → add ,1CR → Apply → Calculate FP → Save. VCM → load FA → Calculate FP → write FA/FP. Then run a full code so the car learns the option.

Step 3 — Code these modules

📦 BDC_BODY3 (0x40) — core

TCM_REMOTE_START → aktiv
RCM_ENABLE_REMOTE_ENGINESTART → aktiv
ALH_AKTIV_IN_PWF_ZUSTAND → ab_Standfunktionen
ASP_STANDHEIZUNG → aktiv
VOKO_SHZ_ALHZ → VOKO_aktive_alle_Sitze (seat heating only)
LRE_LHZ_VOKO → aktiv (heated steering wheel only)

📦 DKOMBI4 (0x60) — instrument cluster

HMI_REMOTE_START_ENABLE → aktiv

📦 DSC_BRS_IB (0x29) — brakes

C_EPBI_Remote_Start → aktiv (if present)

📦 FZD2 (0x56) — roof / alarm

DWA Motor Remote → aktiv (if alarm fitted)

📦 HU_MGU (0x63) — head unit

HVAC_REMOTE_ENGINE_START → aktiv

📦 IHKA4 (0x78) — climate

MIN_TANKINHALT_STANDHEIZEN → 2L
STANDKLIMA_MOTORLAUF → AKTIV_Alle_Aktivierungswege
HSH_ANSTEUERUNG_BEI_VOKO → AKTIV

📦 SM2 driver (0x6D) + passenger (0x6E) — seats

SA_SHZ_VOKO_AKTIVIERUNG → aktiv on both (seat heating only — skip both if no seat heating)

Quick checklist

Module	Key value
BDC_BODY3 0x40	TCM_REMOTE_START → aktiv
BDC_BODY3 0x40	RCM_ENABLE_REMOTE_ENGINESTART → aktiv
DKOMBI4 0x60	HMI_REMOTE_START_ENABLE → aktiv
HU_MGU 0x63	HVAC_REMOTE_ENGINE_START → aktiv
IHKA4 0x78	STANDKLIMA_MOTORLAUF → AKTIV_Alle_Aktivierungswege

Coding names vary by software level — if a module or parameter is missing, skip it and continue.

Step 4 — Test it

iDrive → Climate → Pre-conditioning → tick Remote Engine Start. Then press lock on the key 3× — the engine starts.

Use only where authorized, at your own risk.